Mold release wax
14.90 EUR / container of 400 g
Net weight: 400 g
Apply using a circular, overlapping motion, an even moist film. Allow TR 102 Regular and TR 104 Hi Temp to dry to uniform haze, usually within 5-10 minutes. Hand wipe with a clean dry cloth. For new tooling, it is highly recommended to use the TR 301 Sealer Glaze to improve gloss and seal mold surface. Five to six coats of the paste wax release are normally required for best results. After polish wipe, allow a minimum of 30 minutes between coats for the wax to dry.
400 g = 14 oz
FIBERMAX Ltd © Copyright 2002 - 2020