Glossy sealer & release W325 3.78 lt

Glossy film forming agent, in liquid form, which serves as a sealer and release agent over any kind of surface.

76.80 EUR / container of 3.78 lt

DIRECTIONS
Shake well before use. Apply preferably by spray, although brush or sponge application may be used. When spraying use a gun with a 1 mm nozzle and use only 1.5-2.0 kg/cm3 air pressure. Apply a fog coat and allow to cure for 10 to 15 min. Apply later a heavier coat and allow to cure. A third coat is required until a continuous film (0.5 - 0.8 mm) is formed. Allow to cure thoroughly prior to laminating or casting. When brushing use a soft brush and work from dry into wet areas with light and fast strokes. The first coat should be heavy, followed by lighter applications to fill in pinholes and thin spots.

TO REMOVE COATING
If film is of the proper thickness it can be blown off with an air nozzle. If not, remove with acetone