Epoxy system SR1700 / SD2806 (Fast)

High performance epoxy laminating system SR1700/SD2806 with fast hardener

Each kilo includes 0.72 kg resin + 0.28 kg hardener

High modulus, very stiff system, with low water absorption when cured and excellent adhesion to all types of reinforcements (carbon, aramid, glass etc). This system was developed for automotive, naval, and aerospace applications.

The 2806 and 2803 hardeners can be mixed in any proportion to achieve the required reactivity. The fast hardener 2806 offers fast laminate hardening at ambient temperature from 10 to 40 ^oC / 50 to 104 ^oF and can be slowed down by 2803. Good mechanical properties are achieved after room temperature curing, awesome after post curing.

Fast hardener SD2806
Fast reactivity, short working time, for laminating thin composites. Awesome mechanical properties, parts can be released after 24 hours at 18 ^oC / 64.4 ^oF. Mechanical properties are optimized by post-curing at 50-55 ^oC / 122-131 ^oF. Designed for the manufacturing of high performance composites, with a service temperature up to 70-80 ^oC / 158-176 ^oF.

PROPERTIES
Physical properties of SR1700 epoxy resin
Aspect / colour: Yellowish liquid
Viscosity (mPa.s) at 20 ^oC / 68 ^oF: 1950
Density at 20 ^oC / 68 ^oF: 1.16

Physical properties of SD2806 hardener
Aspect / colour: Yellowish liquid
Viscosity (mPa.s) at 20 ^oC / 68 ^oF: 300 ± 60
Density (g/cm3) at 20 ^oC / 68 ^oF: 1.07 ± 0.01

Mix properties of SR1700 / SD2806 system
Weight ratio: 100 / 39 g
Volume ratio: 100 / 43 ml
Mix viscosity at 20 ^oC / 68 ^oF: 940

Reactivity of SR1700 / SD2806 system
Pot life on 500 g mix at 20 ^oC: 27'
Exothermic peak on 500 g mix (^oC) at 20 ^oC: > 210 ^oC / 410 ^oF
Time to reach exothermic peak at 20 ^oC / 68 ^oF: 23'


Product MDS



Intrastat Number for this product: Epoxy: 39073000, Hardener: 29213091